User talk:Tim: Difference between revisions

Revision as of 14:19, 2 May 2011

dummy

@@ Line 1: / Line 1: @@
-Hi,
+dummy
-Config Options x-x-x-091
-IR100
-*clock-popup: don't work
-----
-'''Help needed!'''
-I tried to add a (hardware) buzzer.For that reason I added these entries:
-*alarm-buzzer-connector=1,alarm-buzzer-pin=16: don't work
-With help of a scope I checked all pins on the barracuda board but there wasn't a buzzer signal.
-Adding a hardware buzzer is useful because you don't need setting up the volume knop. It's very annoying if you programm an alarm and the volume is set to min...
-Does anyone know a radio with a hardware buzzer??
-I scanned all txt-files on the IR100 for a radio with a hardware buzzer option and I found one.It has to be an "IR705" but that model is not listed on the manufacturer's page...
-----
-my IR100:
-[[Image:Ir100 inside.jpg]]
-[[Image:Ir100_back.jpg]]
-I added:
- a mains switch,
- an USB connector for a memory stick,
- an etherner connector(RJ45),
- a switch for choosing wlan or cable connection
-----
-that's my JTAG cable. I sucessfully unbricked my IR100 with that cable and sharpflash.
-[[Image:BILD0163.jpg]]